ASTM D1002, 粘接金属试样的搭接剪切强度
粘结强度在很大程度上取决于所采用的粘接工艺。因此，工艺的变化会引起粘合剂强度试验所获得的结果随之变化。按照 ASTM 标准制备试样是制造商的责任。
Instron's new Precision Series Manual Wedge Grips provide accurate, repeatable, reliable gripping for alignment-sensitive tensile testing applications, such as those governed by Nadcap maximum bending requirements. Capacities are 100 kN (22,000 lbf) and 250 kN (56,000 lbf) , and these grips can also be used for testing in compression with the proper adapters, and in temperatures ranging from -80 ⁰C (-112 ⁰F) to +250 ⁰C (+482⁰ F).
- 487.9 KB
- 2.3 MB
The strength of adhesive bonds depends greatly upon the conditions under which the bonding process is carried out and the testing for which is described in ASTM D 1002, Lap Shear Strength of Adhesively Bonded Metal Specimens. This report demonstrates the capabilities of the Instron test frame and software for testing in accorandance to this standard.
- 142.0 KB