Micro 3 Point Bend Fixture. Rated capacity: 100 N
2810-410 | Micro 3 Point Bend Fixture
Fixed Span 1 mm.
Capacity: 100 N (20 lb, 10 kgf).
Temperature range: -75°C to 300°C (-103°F to 572°F). Maximum specimen width: 5 mm (0.2 in).
Upper and lower fitting: Type Om (12 mm connection with 6 mm clevis pin).
The micro bend fixture is designed for three point flexure testing of miniature components and specimens. The specimen is supported on two lower anvils and load is applied by a single upper anvil at the center of the specimen.
|Anvil Diameter||Upper = 0.5 , Lower = 0.2 mm|
|容量||0.1 kN (22 lbf)|
|Lower Fitting||6mm clevis pin (Type Om)|
|Specimen Width||0 - 5 mm (0 - 0.2 in)|
|Support Span||1 mm (0.039 in)|
|Temperature Rating||-75 +300°C (-103°F to 572°F°F)|
|Upper Fitting||6mm clevis pin (Type Om)|
Bend or flexure testing provides a convenient method for characterizing the strength of the miniature components and specimens typical of those found in microelectronics applications.
- 462.9 KB