Instron
  • Back
  • Home
  • 产品
    试验系统
    万能试验系统
    结构耐久性
    自动化试验系统
    动态和疲劳试验系统
    碰撞模拟
    落锤冲击试验系统和摆锤冲击试验机
    扭转试验机
    流变仪和熔融指数仪
    HDT 和 Vicat
    系统已停产
    附件
    软件
    载荷传感器
    剥离、摩擦、击穿
    环境试验箱和高温炉
    拉伸夹具
    三点弯曲夹具
    压盘
    生物医学夹具
    引伸计
    复合治具
    电子和微电子测试配件
    试样测量和准备
    所有配件
  • 行业解决方案
    ASTM 标准 ISO标准 其他标准
    按行业
    按行业
    电池
    生物医学
    电子产品
    材料
    复合材料
    金属制品
    塑料制品
  • 服务和支持
    INSTRON® RTS, 由 Connect提供 产品生命周期 培训
    服务
    标定和校准
    Instron 实施帮助
    技术支持
    常见问题解答
    软件更新服务
    资源
    手册
    序列号定位器
  • 我们的企业
    职业发展 媒体发布 订阅我们的新闻简讯
    关于我们
    公司历史
    位置
    认证与证书
    资源
    术语表
    测试类型
    资料图书馆
    案例分析
    新闻
    博客
    网络研讨会
    活动
    隐私权和条款
    辅助功能
    Cookie通知
    数据隐私声明GDPR
    出口管制
    隐私声明
    条款及细则
    使用条款
  • 联系我们
  • 中国
产品 » 测试系统 » Structural Durability » Structural Durability Products » Power Packs and Accessories

Power Packs and accessories

Menu
  • Structural Durability Products
    • Controller Labtronic® 8800ml
    • Hydropuls® actuators
    • Power Packs and Accessories
    • Sensors
    • Servo valves
    • Test frames and fixtures
Contact Us
Hydraulic
Hydraulic 2
Hydraulic 3
Hydraulic 4
  • Hydraulic
  • Hydraulic 2
  • Hydraulic 3
  • Hydraulic 4
  • 介绍
  • 相关产品
  • 软件
  • 联系我们

Challenge

High-quality hydraulic power supply units are required to supply hydraulic oil to servohydraulic linear and rotary actuators, testing machines and test systems. Due to the use of servovalves, care must be taken to ensure the highest purity of the pressure oil in order to ensure a long service life of the valves. At the high pressures and oil velocities that occur in a servohydraulic system, even the smallest dirt particles at the control edges of the servo valve are highly erosive. 

Since the units often operate continuously around the clock, maintenance requirements and the ease of service are key considerations. In addition, modern hydraulic units have to meet high standards with regard to laboratory safety, energy consumption and environmental compatibility.

Solution

Instron hydraulic power supply units (HPUs) are the result of many years of experience in the field of high-pressure hydraulics.
Instron offers 6 standardized hydraulic units with nominal flow rates between 26 l / min. Up to 365 l / min at operating pressure 280 bar (other operating pressures, e.g.: 210 bar are also possible).
The power packs can be coupled to one another in order to enable larger flow rates, resulting in a large shared reservoir. The respective motors and pumps can be individually switched in order to ensure economical operation.

Class A efficiency motors combined with variable flow pumps provide the best possible energy efficiency whilst the standard 280 Bar operating pressure provides further efficiency benefits in comparison to 210 bar systems.

All the key components have been designed to minimize service requirements and are easily accessable for inspection and preventative maintenance. The optional pump management system ensures service hours of multiple pumps are balanced to further optimize maintenance times and costs.   

For centralized hydraulic facilities, Instron offers tailor-made solutions to suit the specific needs of the laboratory. In this case, central tanks can be used and the size and number of motor-pump units can be optimized for efficiency.

The essential features of the Instron hydraulic power packs are as follows:

  • Low energy consumption thanks to infinitely variable flow control.
  • Constant operating pressure (adjustable up to 290 bar).
  • Pressure line filtration of the oil
  • Robust and self-priming pump in 9-piston axial piston design
    • Extremely low volumetric pulsation
    • free from cavitation effects
  • Very smooth running due to multiple vibration insulation
  • Connection-ready with complete control electronics
  • Oil cooling with water (optionally with air)
  • Operation direct and/or via remote control
  • Designed for minimal maintenance and ease of service

In addition to test systems operating with a defined and fixed number of actuators, a high degree of flexibility is required for the testing of components with regard to expansion, interchangeability or modification of the test set-up. In order to meet these requirements, Instron has developed the concept of modularly configurable function blocks. The function blocks consist of different functional units which are combined as required to perform the following tasks:

  • Switch the hydraulic power on and off
    • Pre-filling with low flow and low pressure in setup mode
    • Pressure increase to nominal pressure
    • Save energy and targeted delivery as needed
  • Reduced and limited working pressure and flow
  • Pressure relief

Axle Test System

Axle test rigs are used to reproduce different loads applied to the axle elements when a vehicle is traveling over a variety of road surfaces. Instron can provide models for testing of car, van, truck and bus axles with 6 degree-of-freedom.

Component Test Systems

Instrons component testing systems are characterized by the highest quality and reliability, ensuring the highest productivity in daily use.

Multi-Axis Shaking Table (MAST)

Multi-axis simulation (MAST) tables are designed for testing of a variety of different specimens in six degrees of freedom. These include components and subassemblies exposed to vibratory loads during vehicle operation; from seats, dashboards and interior equipment components to engine mounts, and cooling modules.

Road Simulator

HYDROPULS® road simulators are a versatile and cost efficient solution for testing load inputs through the tires. They are used to perform durability tests, as well as acoustic and vibration analyses in testing and development (BSR, NVH) on complete vehicles, subsystems and power train assemblies.

Full Vehicle Test System

Instron offers comprehensive solutions with and without vehicle restraint, with long- or short-stroke introduction of lateral forces as well as the optional environmental simulation with regard to temperature humidity and sun loading.

Biaxial Wheel Test System (ZWARP)

The Biaxial Wheel Test (ZWARP) developed by Instron includes an additional hydraulic actuator which allows a controlled and highly accurate adjustment of the angle of attack to produce high lateral forces.

Dynamic Torsion Test System

The dynamic torsion test stand is designed for the operational fatigue testing of torsional vibration dampers under rotational speed.

Shock Absorber Test Systems

Instron's MSP test system is the ideal tool for reliable, fast and realistic tuning of vehicle chassis designs and development of shock absorber systems.

Elastomer Test System VHF and MHF

The MHF and VHF excel outstanding flexibility and the capability to adapt to constantly changing requirements of the viscoelastic properties of elastomeric suspension and chassis components. They are designed specifically for optimum testing of these components to establish their dynamic characteristics.

RSLabSite modulogic

All you need for your durability tests is the measurement data obtained from the proving ground – RS LabSite® modulogic will do the rest!

您的邮箱地址

请输入您的电子邮箱地址 邮箱中必须包含@符号 邮箱地址只能包含字母,数字和以下特殊符号: . ! # $ % & ' * + - / = ? ^ _ ` { | } ~ 邮箱地址域名只能包含字母,数字,圆点(.)和连接符(-)

您的留言

750 Character Max 请输入您的留言信息 邮箱地址只能包含字母,数字和以下特殊符号: . ! # $ % & ' * + - / = ? ^ _ ` { | } ~
下一步 检查您是否是旧访客...

欢迎回来!

您的联系信息

请输入您的名字 Please use letters and numbers only.
请输入您的姓氏 Please use letters and numbers only.
请选择您的国籍
请输入您的公司名称 Please use letters and numbers only.
请输入您的地址 Please use letters and numbers only.
请输入您的地址2 Please use letters and numbers only.
请输入您的地址3 Please use letters and numbers only.
请选择您所在的国家 Please use letters and numbers only.
请输入您的城市 Please use letters and numbers only.
请选择您的州/省
请输入您的邮政编码 Please use numbers only
请输入您的电话号码 Please use numbers only

请确定您同意英斯特朗隐私和 Cookie政策的条款与条件并提交

我同意英斯特朗隐私和 Cookie政策的条款与条件
请选择订阅服务 您有一个或多个空白处,请完成表格并继续 您有一处或多处格式错误,请解决错误并继续 请确定您同意英斯特朗隐私和 Cookie政策的条款与条件并提交

Please Select Your Preferred Region

Dismiss Region Selector

Americas

  • North America
  • Brasil
  • South America

All Other Countries

  • Global Site

Europe

  • France
  • Deutschland
  • Italia
  • Polska
  • España
  • United Kingdom

Asia Pacific

  • 中国
  • India
  • 日本
  • 대한민국
  • 台灣
  • ประเทศไทย
Instron Logo White
联系信息

上海市南京西路819
号中创大厦17 层, 邮编:
200041, China

销售:  400 820 2006

服务:  400 820 2016

常规: +86 (0)21 62158568

常用链接
  • 试验系统
  • 软件
  • 附件
  • 产品目录
  • 资源库
  • 试验解决方案
  • 网络研讨会
  • 案例分析
  • 活动
  • 职业发展
  • 术语表
  • 新闻
Policies / Legal
  • 隐私与 Cookie 政策
  • 使用条款
  • 出口控制
  • 数据保护声明 GDPR
联系我们
订阅我们的新闻简讯
电子邮件地址
© Illinois Tool Works Inc.保留所有权利。
[email protected]
  • 隐私与 Cookie 政策
  • 使用条款
  • 出口控制
  • 数据保护声明 GDPR