ASTM D5034 纺织面料的断裂强力及伸长率-抓样法

ASTM D5034

Written by Charlie Pryor

ASTM D5034 is a standard used to test the breaking strength and elongation of textiles fabrics. ASTM D5034 mainly applies to most woven textile fabrics such as weather-resistant barriers, but can be applicable to fabrics produced by other techniques. It is important to review the full standard in order to fully understand the test setup, procedure, and results requirements.

The ASTM D5034 test method specifies a procedure to determine the maximum force and the elongation at maximum force of textile fabrics using a grab method. A grab test is a tensile test in which only the center part of the specimen (not the full width) is gripped in the jaw faces. Two sets of specimens are prepared, one in the warp (machine) direction and one in the filling (cross) direction.

Materials Testing System
ASTM D5034 test setup

ASTM D5034 Test Setup

1. Instron 68SC-5

2. Bluehill Universal Dashboard (2490-696)

3. 2580 Series Load Cell (2580-5kN)

4. 2712 Series Pneumatic Grips (2712-045)

 

 

GripsWhile manual side action grips can work for ASTM D5034, many labs prefer to use pneumatic side action grips with rubber coated jaw faces due to their ease of use, productivity, and better repeatability. Adjustable grip pressure also allows users to fine-tune the gripping pressure to avoid jaw breaks or slippage.
2712-045
5 kN Model | 2712-045
Tips and Tricks
  • For ASTM D5034 testing it is important to have an increased test data rate to ensure the capture of a high number of data points. The data rate must be fast enough to catch the peaks generated when individual fibers within the fabric fail. Rapid data capture rate with Instron's 6800 series allows data peaks and valleys to be captured accurately at up to 5 kHz. 
  • Fabric specimens are particularly prone to slippage during testing. Instron's pneumatic side action grips with rubber faces are well-suited to gripping nearly all types of fabric specimens for this test, minimizing slippage while maintaining high throughput.
  • For ASTM D5034, crosshead displacement is often used to report elongation. Whenever crosshead displacement data is used, compliance correction should also be used to remove the system's compliance from the data. Please review the compliance correction whitepaper for more details. 
Related Content

6800 系列高级测试系统宣传册

Instron 6800 系列通用测试系统可提供无与伦比的准确性和可靠性。6800 系列以专利申请中的操作员保障系统架构为依托,架构采用全新的 Smart-Close 空气套件并具有碰撞缓解功能,使得材料测试比以往任何时候都更简单、更智能、更安全。

Bluehill Universal 宣传册

Bluehill Universal 软件从头开始构建,旨在提供触摸互动和直观的用户体验。使用诸如预装测试方法、几秒钟内快速测试、增强的数据导出以及 Instron Connect(一种全新功能,可提供与服务的直接通信联系)等功能,发现更简单、更智能的测试。 Bluehill 2 和 Bluehill 3 等以前版本软件的用户可以轻松升级到最新版本的 Bluehill。

2712-04X 系列气动侧动夹具

气动侧动夹具为各种材料提供了通用夹持解决方案。额定容量 1 - 10 kN。