ASTM D6110夏比冲击性能的测定
ASTM D6110规定了使用具有适当大小锤臂的摆锤系统以三点弯曲配进行冲击试验，以测定塑料抗破裂性的方法。该试验为非仪器化试验，通常用于测定使试样破裂所需的能量。根据试样由何种材料制成以及该试样的切口位置采用不同的试验参数。虽然类似于ISO 179-1（夏比冲击性能的测定——非仪器化冲击法），但是试验定义是明显不同的，因此不能互换。
为满足标准要求，建议使用我们手动或电动的CEAST 9050摆锤系统，以及试样夹钳、大小适当的档肩和锤。为充分了解材料在低于室温环境下的冲击反应，还建议使用我们的Cryo Dispenser或Cryobox在线冷却箱系统。此外，仪器化锤头搭配数据采集系统的应用可以帮助辨识和研究破坏模式和冲击记录。对于试样的准备，建议使用我们的Motorized Notchvis或自动切口机，该装置配有恰当的刀具，使用户可根据试验标准切割出所需试样。
如需充分了解试验设置、程序、结果和试样准备要求，请通过下方链接参考标准。
CEAST 9000 Series Pendulum Impact Series
Impact resilience is one of the most important properties and cost-effective evaluations for material producers, both with respect to product development and quality control. As components could fail at stress levels well below the critical fracture stress, accurate determination of impact damage propagation is necessary. With the combined experience of CEAST, Instron® has more than 50 years experience in designing pendulum impact testing systems.
- 产品
- 9/12/2013
- 1.7 MB
CEAST Data Acquisition and Analysis
The new CEAST DAS 64K is a state-of-the-art Data Acquisition System designed for impact testing instruments. Compatible with the full range of CEAST impact testing systems, including pendulum type machines (CEAST 9000 Series) and drop towers (CEAST 9300 Series), it’s the key for instrumented impact testing. The DAS 64K also enables the data collection from instrumented tups or hammers on older models and non-CEAST impact machines.
- 产品
- 9/30/2013
- 0.5 MB
Accessories for CEAST Impact Systems
Accessories for CEAST Drop Tower and Pendulum Impact Testers.
- 产品
- 3/20/2013
- 1.7 MB