我们的网站使用 cookie 以确保为您提供最佳的用户体验。 继续浏览我们的站点,您就会同意使用 cookie。更多信息
关 Close Cookie Notification
Instron
  • Back
  • Home
  • 产品
    试验系统
    万能试验系统
    结构耐久性
    自动化试验系统
    动态和疲劳试验系统
    碰撞模拟
    落锤冲击试验系统和摆锤冲击试验机
    扭转试验机
    流变仪和熔融指数仪
    HDT 和 Vicat
    系统已停产
    附件
    软件
    载荷传感器
    剥离、摩擦、击穿
    环境试验箱和高温炉
    拉伸夹具
    三点弯曲夹具
    压盘
    生物医学夹具
    引伸计
    复合治具
    微电子部件夹具
    试样测量和准备
    所有配件
    附件目录
  • 行业解决方案
    按材料 按标准 按试测试型
    按行业
    航空航天
    按行业
    生物医学
    电子产品
    材料
    复合材料
    金属制品
    塑料制品
  • 服务和支持
    Instron Remote Technical Support 产品生命周期 培训
    服务
    标定和校准
    Instron 实施帮助
    技术支持
    常见问题解答
    软件更新服务
    资源
    手册
    序列号定位器
  • 我们的企业
    职业发展 媒体发布 订阅我们的新闻简讯
    关于我们
    公司历史
    位置
    认证与证书
    资源
    术语表
    测试类型
    资料图书馆
    案例分析
    新闻
    博客
    网络研讨会
    活动
    隐私权和条款
    辅助功能
    Cookie通知
    数据隐私声明GDPR
    出口管制
    隐私声明
    条款及细则
    使用条款
  • 联系我们
  • 中国
测试解决方案 » 测试解决方案 测试类型 » 流变学 » ISO 1133-2 & ASTM D1238

ISO 1133-2 and ASTM D1238: When Load Cell Ensures Repeatability of Results

Standard

  • ISO 1133
  • ASTM D1238

Specimen

  • 薄膜
  • 粉末

Test Types

  • 流变学

Materials

  • 塑料
  • 橡胶/弹性体

Business Sector

  • 消费品/工业用品
  • 测试服务部门
联系我们获取附件手册
  • 介绍
  • Literature

Melt Flow Rate (MFR) and Melt Volume-Flow Rate (MVR) can normally be obtained with easy and quick test procedures. Test standards specify detailed test conditions, including pre-heating period, starting position, and measurement length/time. However, when using a basic melt flow tester (extrusion plastometer), fulfilling all standard specifications can be challenging with some polymers and compounds, and results can be affected by poor repeatability.

It's not uncommon that during the pre-heating period the sample swells and pushes the piston up, especially when testing under low-load conditions (e.g. less than 2.16 kg). Applying a compacting force higher than the test weight can prevent this from happening, and if precise positioning of weight lifting device is possible, the starting position and timing for measurements can be set in a much more repeatable way.

Some samples show very high viscosity and effective compacting requires high loads. Air bubbles trapped inside as a result of poor compacting can affect the MFR/MVR results. A high, but controlled, compacting force is needed. Plus, at the end of tests, the same force can be applied for purging out the remaining material, reducing the total test cycle time.

We tested an HDPE sample with an expected MFR of about 0.25 g/10 min (190 °C, 2.16 kg) with a CEAST MF30, applying ISO 1133-2 Procedure B. CEAST MF30 has a load cell integrated with the weight lifting device, giving the possibility to apply up to 750 N of compacting force. To compare the repeatability of results, we performed twenty consecutive tests using the load cell for compacting, and another twenty without (so using only the test weight to compact). The average MFR result was close to the expected value in both cases. However, results from the tests performed without the load cell were consistently higher and with a standard deviation of 0.012 g/10 min (close to 5%), whereas tests where the load cell was compacted the standard deviation was as low as 0.005 g/10 min (2%). Similar results were obtained also following ASTM D1238 Procedure B.

CEAST Melt Flow Series Brochure

Flow properties of molten plastics are a critical characteristic requiring good knowledge and control. The Instron® Melt Flow Testers are specifically designed for easy and accurate measuring of the Melt Mass-Flow Rate (MFR) and the Melt Volume-Flow Rate (MVR). CEAST Melt Flow Testers range from systems that perform a simple manual test procedure to semi-automated testing systems performing multiple weight tests.

  • 产品
  • 7/3/2013
  • 1.1 MB

Region Selector

Dismiss Region Selector

Americas

  • North America
  • Brasil
  • South America

All Other Countries

  • Global Site

Europe

  • France
  • Deutschland
  • Italia
  • Polska
  • España
  • Türkçe
  • United Kingdom

Asia Pacific

  • 中国
  • India
  • 日本
  • 대한민국
  • 台灣
  • ประเทศไทย
Instron Logo White
联系信息

上海市南京西路819
号中创大厦17 层, 邮编:
200041, China

销售:  400 820 2006

服务:  400 820 2016

常规: +86 (0)21 62158568

常用链接
  • 试验系统
  • 软件
  • 附件
  • 产品目录
  • 资源库
  • 试验解决方案
  • 网络研讨会
  • 案例分析
  • 活动
  • 职业发展
  • 术语表
  • 新闻
Policies / Legal
  • 隐私与 Cookie 政策
  • 使用条款
  • 出口控制
  • 数据保护声明 GDPR
联系我们
订阅我们的新闻简讯
电子邮件地址
© Illinois Tool Works Inc.保留所有权利。
[email protected]
  • 隐私与 Cookie 政策
  • 使用条款
  • 出口控制
  • 数据保护声明 GDPR