Product Manuals
2820-035 and 2820-036 Peel Test Fixtures – Equipment Reference
Instron’s 90° Peel Test Fixture (Model 2820-035) and the Variable Angle Peel Test Fixture (Model 2820-036) are testing devices designed to measure the force required to peel a sample from its backing material or substrate. This guide provides instructions on how to use your components and other frequently performed operating tasks. This manual covers specifications, installation, operations and maintenance.
操作手册 08/06/2020 2.35 MB
2711-006 Miniature Grips for Low-Force Testing – Operator’s Guide
This guide provides instructions on how to use your components and other frequently performed operating tasks. This manual covers specifications, installation, operations, maintenance and illustrated parts.
操作手册 08/06/2020 779.95 KB
Model 2810-005 Coefficient of Friction Testing Fixture – Equipment Reference
This guide provides instructions on how to use your components and other frequently performed operating tasks. This manual covers specifications, installation, operations and illustrated parts.
操作手册 08/04/2020 1.08 MB
Series 2714 and 2734 Cord and Yarn Grips – Equipment Reference
This guide provides instructions on how to use your components and other frequently performed operating tasks. This manual covers installation and preparing for use, as well as maintenance and replaceable parts.
操作手册 08/04/2020 379.57 KB
2716-2736 – 100 and 150kN Wedge Grips – Operating Instructions
This guide provides instructions on how to use your components and other frequently performed operating tasks. This manual covers installation, operation and maintenance.
操作手册 08/04/2020 1.49 MB
5kN, 30kN and 50kN Wedge Grips – Reference Manual
This guide provides instructions on how to use your components and other frequently performed operating tasks. This manual covers three types of grips: 5kN, 30kN and 50kN Wedge Grips
操作手册 08/04/2020 1.17 MB
2830-036 Miniature Grips for Low-Force Testing – Reference Manual
This guide provides instructions on how to use your components and other frequently performed operating tasks. This manual covers four types of grips: a set of mechanical action wedge grips, manually operated screw grips, a set of chuck grips similar to the chuck on an electric drill, and a set of pincer-action fiber grips. The four types of grips described are covered throughout this manual. The manual is divided into chapters covering description, specifications, installation, operation, maintenance, and parts breakdown. The chapters are subdivided into information about each type of grip.
操作手册 08/04/2020 780.73 KB
2710-11x Screw Action Grips – Reference Manual
This guide provides instructions on how to use your components and other frequently performed operating tasks.
操作手册 08/04/2020 845.18 KB
5 kN Flexure Fixture – Reference Manual
This manual provides information on your flexure fixture as well as, instructions regarding procedures for installation, operation and maintenance.
操作手册 07/22/2020 1.23 MB
2712 Series Pneumatic Side-Action Grips – Health and Safety Information
Pneumatic grips are designed to apply a high clamping force on test specimens. For your safety follow the warnings in this guide and refer to numbered symbols and images on page 2
操作手册 07/22/2020 581.03 KB
Pneumatic Side Action Grips Operator’s Guide (2712-041, 042, -045, -046, -052)
This manual provides instructions on how to use your grip components and controls as well as procedures for installation, operation and maintenance.
操作手册 07/22/2020 1.7 MB
Pneumatic Side Action Grips Operator’s Guide (2712-051)
This manual provides instructions on how to use your grip components and controls, procedures for installation, operation and maintenance.
操作手册 07/22/2020 1.22 MB
2620-600 Series Dynamic Strain Gauge Extensometers – Reference Manual
This guide provides instructions on how to use your system components and controls, procedures for setting limits, calibration and other frequently performed operating tasks.
操作手册 07/22/2020 3.71 MB
AutoX Automatic Contacting Extensometer – Operator’s Guide
This guide provides instructions on how to use your system components and controls, procedures for setting limits, calibration and other frequently performed operating tasks.
操作手册 07/22/2020 1.79 MB
Instron Video Extensometer AVE2 and SVE2 – Operator’s Guide
These instructions describe the function, operation and maintenance for the Instron Video Extensometer AVE2 and SVE2, model 2663-902 and 2663-901, including how to use your system components and controls, procedures for setting limits, calibration and other frequently performed operating tasks.
操作手册 07/22/2020 3.4 MB
Long Travel Elastomeric Extensometers – Reference Manual
These instructions describe the function, operation and maintenance for the following Instron® Long Travel Extensometer catalog numbers: • 2603-080 – 250 mm travel – for Instron twin column electromechanical testing machines. • 2603-084 – 250 mm travel – for Instron single column electromechanical testing machines. • 2603-085 – 750 mm travel – for Instron twin column electromechanical testing machines. • 2603-086 – 750 mm travel – for Instron single column electromechanical testing machines.
操作手册 07/22/2020 1.41 MB