Product Manuals
DX Static Hydraulic Universal Testing System – System Concepts Manual
These instructions provide additional information beyond what is necessary to operate the various models of the DX testing systems. These instructions are intended for a laboratory or facilities supervisor, or Instron service personnel. These instructions assume the following: • You are an operator familiar with the operation of materials testing systems in general. • Your system has been installed in its final location according to the requirements outlined in the system’s Pre-Installation Manual. • Your system consists of a frame, a hydraulic power supply, a control unit, a computer system with an Instron materials testing software package, and any testing accessories necessary to secure the specimen in the test space. • Software test methods that are appropriate for your testing requirements are available. These instructions do not include the development of test methods within the materials testing software. This is covered in more advanced training that can be provided by Instron Service and Training departments.
操作手册 07/14/2020 1.79 MB
Model DX Static Hydraulic Universal Testing System – Operating Instructions
These instructions describe the function, operation and maintenance for various models of the DX testing systems. If unsure of your specific model, refer to “System identification” on page 14. These instructions assume the following: • You are an operator familiar with the operation of materials testing systems in general. • Your system has been installed in its final location according to the requirements outlined in the system’s Pre-Installation Manual. • Your system consists of a frame, a hydraulic power supply, a control unit, a computer system with an Instron materials testing software package, and any testing accessories necessary to secure the specimen in the test space. • Software test methods that are appropriate for your testing requirements are available. These instructions do not include the development of test methods within the materials testing software. This is covered in more advanced training that can be provided by Instron Service and Training departments.
操作手册 07/14/2020 1.96 MB
DX Static Hydraulic Universal Testing System – Pre-Installation Manual
The information in this document is intended to aid customers in the site preparation, unpacking, lifting, and installation of the Instron Model DX Static Hydraulic Universal Testing Systems. These instructions assume the following: • Your system consists of a frame, a hydraulic power supply, a control unit, a computer system with an Instron materials testing software package, and any testing accessories necessary to secure the specimen in the test space. It is important that the site be adequately prepared in order to avoid unnecessary delays in the installation process and to ensure that the testing system operates without interference from various environmental conditions (i.e. excess building vibrations or extreme temperature and humidity levels).
操作手册 07/14/2020 1017.22 KB
Thermal Safety Sheet for 3119-600 Series-Temperature Controlled Chambers
This document provides important Health and Safety information specifically regarding handling, installation, operation, maintenance and decommissioning of Instron furnaces and environmental chambers. The best safety precautions are a thorough understanding of the equipment by reading the instruction manuals and always using good judgement.
操作手册 07/14/2020 1.9 MB
3119-600 Series Temperature Controlled Chambers Pre-Installation Manual
The purpose of this manual is to provide you with information that will assist you in creating the conditions for a trouble free installation of your Instron® 3119-600 series chamber. The chamber models covered and their options are discussed in the different sections of this manual.
操作手册 07/13/2020 2.01 MB
3119-600 Series Temperature Controlled Chambers Operating Instructions
This manual contains the information necessary to operate the chamber by giving safety information, describing the controls and providing detailed procedures for general operation.
操作手册 07/13/2020 1008.29 KB
3400 系列双柱台式机操作员指南
提供了系统首次安装调试完成后启动测试所需的必备信息。该文档包含详细的功能介绍、系统准备注意事项以及试样测试相关说明。
操作手册 02/10/2020 4.9 MB
